Bearings & Hubs

2.32" Bearing Protectors & Covers - 2 PackKeeping the wheels of a trailer well lubricated is an important part of towing responsibly. It may not be on the forefront of most users' minds, but a trailer's wheels need to be cared for just like the...

1.78" Bearing Protectors & Covers - 2 PackKeeping the wheels of a trailer well lubricated is an important part of towing responsibly. It may not be on the forefront of most users' minds, but a trailer's wheels need to be cared for just like the...

1-1/16" Wheel Bearing KitIt may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The...

3/4" Wheel Bearing KitIt may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings...

Rotor Complete Kit Vented 9.75" Integral, No Grease 5 Stud Dacromet Finish KnottComplete 9.75″ Disc Brake Rotor Assembly Manufactured by Autoflex Knott.Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5″ Bolt Pattern. Inorganic,...

Brake Pads 10 & 12" Disc Full Axle 2 Sets Inner & OuterFeatures:Optimal at Transferring Heat Generated From BrakingUse with EITHER 10″ or 12″ Disc Brake Rotor AssembliesSold as FULL SET, BOTH Inner and Outer Assemblies, for ONE (1)...

12″ Dexter Vented Rotor Disc Brake KitLoad Rite's 6-lug, 12-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,000-capacity spindle.Kit Includes:Vented rotor with Galvx finishAluminum caliper with e-coat finishCeramic...

12″ AutoFlex Knott Disc Brake KitLoad Rite's 6-lug, 12-inch vented rotor disc brake kit is manufactured by AutoFlex KNOTT and fits UFP 6,000 lbs. capacity 6-bolt axles. Does not fit Tie Down.Kit Includes:Vented cupped and studded, zinc rotor, and...

9.6″ Dexter Vented Rotor Disc Brake KitLoad Rite's 5-lug, 9.6-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,750 lbs capacity spindle.Kit Includes:Vented rotor with Galvx finishAluminum caliper with e-coat...

10″ Knott Disc Brake KitLoad Rite's 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles.Kit Includes:Vented cupped and studded, zinc rotor, and hub assemblyLoaded...

8,500lb Disc Brake Actuator – Tie Down Engineering ModelThe Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle...

7,500lb Disc Brake Actuator – Tie Down Engineering ModelThe Model 750E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle...

6,600lb Disc Brake Actuator – Tie Down Engineering ModelThe Model 660E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle...

20,000lb Capacity Disc Brake Actuator with 2-5/16″ CouplerThe Model works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle...

16,500lb Capacity Disc Brake Actuator with 2-5/16″ CouplerThe Model 16.5 works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow...

HubMate Wheel Bearing ProtectorsHubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out...

Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" GalvanizedFeatures:1-3/8" x 1-1/16" Tapered5 x 4-1/2" GalvanizedWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of...

Grease Seals f/1" to 1-1/16" Straight SpindleProduct DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and...

CE Smith Dust Caps - Hub ID 1.980" - (Pair)Product DescriptionUse this dust cap to protect your axle nut.Features:Fits hub with inner diamerter of 1.98"Sold in pairsWARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are...

Trailer Hub KitHub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-3/8" - 1-1/16"Bolt Cir: 5 x 4.5Cap:...