-
Lewmar
Lewmar Standard Pawl Spring - Small - 20 Pack [1260/7PK]
Standard Pawl Spring - Small - 20 PackLewmar winch pawl springs are made to fit on most sizes of Lewmar winches and serve as the perfect replacement when performing routine maintenance and service.Features:Designed to be used on Lewmar winches that need...$21.95$20.99 -
Barton Marine
Barton Marine Genoa Car - Fits 25mm (1") T Track [25100]
Genoa Car - Fits 25mm (1") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T'...$112.34 -
Barton Marine
Barton Marine Genoa Car - Fits 32mm (1-1/4") T Track [32100]
Genoa Car - Fits 32mm (1-1/4") T TrackFeature precision turned Ertalyte sheaves running on a large diameter center bearing, for friction-free performance under load. Sheaves are designed with extra width to accept two sheets. The sheave axle is...$159.70$126.99 -
Barton Marine
Barton Marine Small Furling Drum - 2.99" [42334]
Small Furling Drum - 2.99"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 4.3M of LineSpecifications:Drum Diameter:...$94.30 -
Barton Marine
Barton Marine Furling Drum - 3.74" [42335]
Furling Drum - 3.74"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drums will accept lines up to 4mm in diameter.Features:Holds up to 8.5M of LineSpecifications:Drum Diameter: 95mmSail...$104.72 -
Barton Marine
Barton Marine Genoa Slide w/Loop f/32mm Track [32301]
Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of Genoa cars and sliders designed to run on a 32mm (11/4")...$75.61 -
Taylor Made
Taylor Made Tidy-Ups Boat Dock Line Holder - Standard Rails [1101]
Tidy-Ups Boat Dock Line Holder - Standard RailsFeatures:Rail mount UV resistant vinyl strap securely holds rope, cords, etc. Fits 1" - 1-1/4" RailsNot sold in pairsWARNING: This product can expose you to chemicals including...$20.95$17.99 -
C. Sherman Johnson
C. Sherman Johnson Pulpit Anchor f/1" Rail [29-501]
Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminated jaw fittings for lower or upper life lines. (1/2" hole). Hole will not accept cast gate hooks.$13.50 -
C. Sherman Johnson
C. Sherman Johnson Eye to Deck Toggle Fitting [LS-2550]
Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees.$25.50 -
C. Sherman Johnson
C Sherman Johnson Eye to Jaw Fitting [LS-2500]
Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.$29.00 -
C. Sherman Johnson
C. Sherman Johnson Eye to Eye Adjustable Fitting [22-100]
Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1".$65.25 -
C. Sherman Johnson
C. Sherman Johnson Shore Adjuster f/3/16" Wire [27-406]
Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.$27.75 -
C. Sherman Johnson
C. Sherman Johnson Short Adjuster f/1/8" Wire [26-406]
Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj.$32.50 -
C. Sherman Johnson
C. Sherman Johnson "T" Style Toggle Jaw f/3/16" Wire [27-415]
"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.$20.50 -
C. Sherman Johnson
C. Sherman Johnson "T" Style Toggle Jaw f/1/8" Wire [26-415]
"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.$22.25 -
C. Sherman Johnson
C. Sherman Johnson "T" Style Deck Toggle f/3/16" Wire [27-415-1T]
Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.$15.50 -
C. Sherman Johnson
C. Sherman Johnson "T" Style Deck Toggle f/1/8" Wire [26-415-1T]
Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.$17.25 -
C. Sherman Johnson
C. Sherman Johnson Double Threaded Interlocking Gate Eye f/3/16" Wire [27-408]
Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.$80.25 -
C. Sherman Johnson
C. Sherman Johnson Double Threaded Interlocking Gate Eye f/1/8" Wire [26-408]
Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.$74.25 -
C. Sherman Johnson
C. Sherman Johnson Interlocking Swivel Gate Eye f/3/16" Wire [27-410]
Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.$60.50
Rigging/Sailing
!