Teak

Wall-Mount Paper Towel HolderTakes standard or jumbo rollSpring-loaded bar1-7/8"H x 12-1/4"W x 4-3/8"D

Stand-Up Paper Towel Holder13-1/2"H x 5-7/8" diameterFits standard or jumbo rollOiled finish

Two-Tier Spice RackHolds up to 6 standard spice bottles on each selfShelves are 3" deep13-1/8"W x 10-1/8"H x 4-1/4"D

Two-Bottle RackHolds two 750ml wine bottles or two standard size water bottles8-3/8"L x 5-1/2"H x 3-3/4"DBulkhead mount

Dish/Cup/Utensil HolderHolds cups, plates, and flatware16-1/4"L x 9-7/8"H x 7-1/8"D

Dish/Cup HolderHolds 4 each of plates and cups19-3/4" L x 4-1/4" D x 11-1/2" H

Teak Drinkholder with Removable Cockpit Table Top - Holds 4 GlassesFeatures:Table Top Dimensions: 16" x 24" Drinkholder holds four glassesCan be used without table Fits all 7/8" or 1" diameter tubing pedestal steering guardsEasily removed

Louvered Door & FrameCutout: 14" x 19"Left Hand Opening

Louvered Door & FrameCutout: 14" x 19"Right Hand Opening

Louvered Door & FrameCutout: 11" x 11"Left Hand Opening

Louvered Door & FrameCutout: 11" x 11"Right Hand Opening

Teak Louvered InsertHeight:9-3/8"Width:18"Depth:3/4"Cut OutHeight:8-3/8"Width:17"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the...

Teak Louvered InsertHeight:6-3/8"Width:11-3/16"Depth:3/4"Cut OutHeight:5-3/8"Width:10-3/16"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less...

Teak Louvered InsertHeight:16"Width:9-1/8"Depth:3/4"Cut OutHeight:15"Width:8-1/8"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than the...

Teak Louvered InsertHeight:7-1/2"Width:9-1/8"Depth:3/4"Cut OutHeight:6-1/2"Width:8-1/2"Measurements for the inserts, door, and drawer/door fronts are from outside edge to outside edge.All items have a 1/2" rabbet and use a cutout size one inch less than...

Teak Trim Ring6-3/8" Diameter Trim Ring4" Inner Diameter Opening3/8" Thick6" Inner Diameter (Inside Flange)Pre-Drilled Mounting HolesBack Recessed, 1/8" FlangeUse to trim out portholes

Switch Cover/Switch PlateHeight:5-1/16"Width:3-5/8"

Ground Fault Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Outlet Cover/Receptacle PlateHeight:5-1/16"Width:3-5/8"

Oval Drawer Pull4" LengthSurface Mount2-Pack with hardware