Seating

EVO Lite Teal with Flex Suspension No PlinthLightweight helm seat, EVO is Shark's helm seat that is lightweight, customizable, and comfortable. You can choose between EVO and EVOlite depending on the level of protection required.Affordable,...

EVO Teal with Flex Suspension No PlinthLightweight helm seat, EVO is Shark's helm seat that is lightweight, customizable, and comfortable. You can choose between EVO and EVOlite depending on the level of protection required.Affordable, comfortable,...

Thread-Lock™ Aluminum Surface Mount Base - 10"High-strength aluminum surface mount base with anodized finish. Use with any Thread-Lock™ fixed-height post (sold separately). Can be used with Thread-Lock™ table and grill posts (sold...

2-3/8" Thread-Lock™ Fixed-Height Post - 13"Sturdy 2-3/8″ high-strength aluminum post for use while underway. Locking collar prevents unintentional removal from base. Use with Trac-Lock™ non-locking seat mount (sold separately).

KingPin™ Standard Square Steel Base with Satin E-Coat - 7"x7"Standard square mild steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

KingPin™ Standard Square Steel Base with Brass - 7"x7"Standard square stainless steel base with satin finish. 3″ below deck needed. Requires a 2-1/2″ hole in the deck.

2-3/8" Plug-In Hi-Lo Replacement BushingReplacement bushing for 2-3/8″ Plug-In™ Hi-Lo seat mount. Helps to distribute the weight load across the top of the post.

2-3/8" Locking Fixed-Height Post - 13"Anodized to withstand all conditions. Heights are from the top of the post to the deck when the post is installed. Fits into any 2-3/8″ Plug-In™ base (sold separately). Use with any 2-3/8″...

Workhorse Air-Ride Slide & Swivel - 4"10-1/2″ x 14-1/2″ x 1/4″ aluminum formed slide plate with anodized aluminum finish and heavy-duty stainless steel lock pin. Large, easy-to-reach control knobs. Swivels on post. Slide travels...

Elite Slide & Swivel - 4"8-1/4″ x 13″ seat mounting platform. Anodized slide and polish post mount fits over 4″ pedestals, locks and tightens securely to prevent wobble. Large pivot area ensures stability. Rotates 360°. Slide...

Universal Chair Mounting PlateAdapts a swivel mount to fit most seat mount patterns. High-strength aluminum. Use with any Springfield® marine swivel. Adds structural support to rotational molded seats and other plastic seat bottoms.

2" Taper-Lock™ Hi-Lo BushingReplacement bushing for the top of 2″ Hi-Lo posts. For use on models 2020 and earlier.

2-3/8" Trac-Lock™ III Swivel BushingReplacement bushing for 2-3/8″ Trac-Lock™ III slides and swivels. Use on Trac-Lock™ III 2002 and newer.

Taper-Lock™ Seat Swivel BushingReplacement bushing for Taper-Lock™ Hi-Lo swivel. Washer included.

5-Legged Deck Base Caster Replacement - 75mm with Brake Urethane5-pack caster replacements for a 5-legged deck base.

KingPin™ Unintentional Detach Retention Cup - PlasticReplacement standard post pin for use in KingPin™ standard base.

KingPin™ Base Socket CoverPlastic KingPin™ cover keeps sockets clear when not in use. Use on KingPin™ 3/4″ pin base. (sold as each).

SpringLock™/Clip-Lock™ Base Socket Cover3/4″ Deck Base Socket Cover fills the opening when not in use, creating a flush surface. (sold as pairs).

Brass KingPin™ BushingBrass replacement bushing for KingPin™ base.

Support Bushing KitReplacement bushing kit and V-bumper for pivot brackets on Guardian Deluxe and Standard heads to reduce abrasion on the lower unit.