Whitecap

Center Handrail StanchionTube Outer Diameter:1"Height:1-3/4"Fastener:#10(2)Material: 316 Stainless Steel

Description: 316 S.S. Hinged Chain & Rope Deck Pipe Inside diameter - 3-7/8" x 2-1/2" Flange - 4-1/8" x 2-7/8" Fastener - #12(4) Max. Rope Diameter - 1-1/4" Slide top to right to lock into place.

Material: C.P. Brass Fastener: #10 (4) Flange: 3"Inside Diameter: 1-1/2"

Clam Shell Midget Vent 2-1/4" x 2-1/4" Material: 304 Stainless SteelSize: 2-1/4" x 2-1/4"Fastener: #6 (3)

Clam Shell Midget Vent 1-1/2" x 1-3/4" Material: 304 Stainless SteelSize: 1-1/2" x 1-3/4"Fastener: #6 (3)

Cockpit Table with Folding Leaves & 4 Cupholders - TeakFeatures:Table top dimensions - Closed - 16"W x 24"L, Open - 32"W x 24"LBrass hinges/stainless steel hardwareThe drink holder holds 4...

Nylon Body Compression HandleCompression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for...

Nylon Body Compression HandleCompression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for...

Compression Handle - Nylon White/Stainless Steel - Non-LockingCompression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to...

Compression Handle CP Zamac/Black Nylon Locking Fresh Water Use OnlyFeatures:O.D. - 3"Cut-Out - 2-1/2"Surface Depth - 1/8"-3/4"Shaft - 3/8"Has a keyed lockFor Fresh water installation onlyIn order...

Compression Handle Replacement KeyMolded Key for Hexagonal Lock Fits: 6136, 6236, 6738, S-0251, S-0336, S-0436, S-0536.

Director's Chair with Black Cushion - TeakFeatures:Teak Director's Chair with Cushion Seat CoversChair with Black Seat CushionStainless steel hardware18" high from floor to seatFolds for easy...

Door HingeSize:1-1/2" x 3"Fastener: #8(6)Material:Black Nylon Specifications:Material: NylonColor: BlackBox Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbsUPC: 725060303013

Door HingeSize:1-1/2" x 3"Fastener: #8(6)Material: Chrome Plated Zamac*For Freshwater Installation Only Specifications:Material: ZamacColor: ChromeBox Dimensions: 1"H x 1"W x 1"L WT:...

Description: 316 S.S. 6" E-Z Push-Up Cleat. Overall length-6-1/2" Overall width - 1-1/2" Depth - 3-9/16" Cleat length - 6" Stud length - 1-7/8" Barb size - 3/4" Max Rope Diameter - 1-1/4"...

EPA Pull-UP Deck Fill - 30° - Angled - 1-1/2" - GasFeatures:Type - Gas30 DegreesFlange - 3"Hose - 1-1/2"Angle - 30 degreeChain - yesFastener - #10 (3)316 Stainless Steel1/4" turn pull-up cap...

Extra Large Stainless Steel Flush Cupholder Features:Longer depth fits larger water bottles and can coolers (including Yeti)Flush mount designDrink pad made with UV-resistant vinyl for longer...

Fender CleatLength: 2"Base: 1-1/16" x 1-9/16"Fastener:#6(4)Material: Chrome Plated Brass Specifications:Finish: ChromeSize: 2"Construction: BrassBox Dimensions: 1"H x 3"W x 3"L WT: 0...

Fender CleatLength: 2"Base: 1-1/16" x 1-9/16"Fastener:#6(4)Material: Chrome Plated Brass Specifications:Finish: PolishedSize: 2"Construction: BrassBox Dimensions: 1"H x 2"W x 2"L WT:...

Flush DrinkholderCut-Out: 3-7/8"Outer Diameter: 4-3/8"Depth: 2-1/4" - 3-1/8"Material: 304 Stainless SteelIncludes mounting gasket, pad & 3/8" drain tubeFits cans, bottles & can coolers