Accessories

Heavy-Duty Thimble - Stamped 304 Stainless SteelThese Heavy Duty Thimbles are used to protect wire or rope from contact with the load it is hoisting. The thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Ideal for lines...

Door Button - Chrome Plated BrassThese Door Buttons are a sleek, simple, and effective hardware solution to keep doors closed. Spring-loaded design keeps the door in place. Constructed of cast brass with a plain polished or chrome-plated finish. Surface...

Low Profile Cowl Vent/Snap-On Deck Plate - Dip Molded PVCLow Profile Cowl Vents are designed for air intake or cabin ventilation when used in conjunction with a dorade box. Great for bilge ventilation with or without a blower. Ideal for applications...

Jaw & Jaw Swivel - Investment Cast 316 Stainless Steel Body with 304 Stainless Steel PinJaw & Jaw Swivels link together two parts that have separate rotational directions, reducing knotting or twisting and relieving stress. Constructed of...

Bow Shackle - Investment Cast 316 Stainless Steel BodyWith their rounded shape, Bow Shackles are designed for many different applications. Features a screw pin closure for quick removal, making them ideal for rigging applications where fast and/or...

Door Stop & Catch - Investment Cast 316 Stainless SteelThese Door Stops and Catches hold the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release...

Bow Eye - 3/8" - Machined 304 Stainless SteelThese Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machined 304 stainless steel. Includes adjustable finish nuts,...

Splicing Fid - Stainless Steel with Hardwood HandleThis Splicing Fid’s time-tested design makes it the ideal tool for expert rope splicing. Features a hardwood handle for ease of operation and a precision tip for better splices, neater braids, and...

Heavy-Duty Swivel Hasp - 3" - Cast 304/316 Stainless SteelThese Heavy Duty Swivel Hasp is designed with a slotted plate that fits over a swivel pad eye. The swivel eye rotates, acting as a temporary lock, but will also accept most padlocks for more...

Garboard Replacement Plug - Machined BronzeThe replacement plug has a square top for use with a socket wrench. Constructed of machined bronze. Installs with three #10 FH fasteners (not included).Specifications:Weight: .04 ozReplacement plug for 520040...

Snubber - Rubber - 1/2" to 9/16"Mooring Snubbers absorb shock loads and relieve tension on lines and deck fittings. The length of compensating movement can be adjusted by the number of line turns around the snubber, mitigating the effects of wind and...

Thru-Hull with Scupper Valve - Injection Molded AcetelThis Thru-Hull Scupper Valve mounts through the transom and provides a water exit for boats with self-bailing cockpits. Ideal for above the water line drainage. Valve features a soft black flapper...

Motor Well Boot - Molded Rubber - 5-1/2"Motor Well Boot organizes and protects engine control cables, wires, or fuel lines. Black accordion-style seal. Includes mounting ring. Constructed of UV-stabilized molded rubber. Installs with #8 RH fasteners...

Bimini Strap - Nylon Webbing/Stainless Steel - 8"Nylon Bimini Straps are used to replace lost or damaged Bimini top straps. Constructed of 1” wide nylon webbing with corrosion-resistant stainless steel snap hooks. 8’ long...

Gas Tank Strap - Nylon Webbing/304 Stainless Steel - 72"This Gas Tank Strap is for use in securing a portable gas tank. Includes: 1” x 6’ webbing strap with buckle, two footman's loops, and four #10 FH fasteners. Constructed of nylon...

Manual Windshield Wiper - Machined Brass Chrome PlatedManual Windshield Wiper includes an 8”-12” adjustable wiper arm (410051) and 11” blade (411151). This hand-operated wiper is an economical alternative to traditional wiper motors...

Hardware Kit for Drop Leaf Table - Clamp StyleEdson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete...

Hardware Kit for Luncheon Table - Clamp StyleEdson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete...

Stainless Steel Pedestal Guard Mounting Feet - PairEdson Pedestal Guard Mounting Feet are available in pairs as a direct replacement for Edson’s black plastic feet. Gasket and bushing allow for mounting 1”, 1-1/8” or 1-1/4” guard...

Mechanical Hatchlifter 12" STK FastThe AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By...