Radar/TV Mounts

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The...

Top Plate for FLIR M100 & M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard. Specifications:Type: AdaptersBox Dimensions: 5"H x...

Mast Mount f/KVH TV1Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. AdjustableDesigned with fore and aft...

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features:Pre-drilled mounting holes...

Mast Platform for KVH M7/TV6 & Intellian i6/D6Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned...

Mast Mount for FLIR Thermal Camera & Raymarine M-SeriesAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high...

Direct Mount 4° Wedge f/Simrad HALO™ Open Array RadarImprove your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands...

Adapter Plate for Simrad HALO™ Open Array Radar Use for Modular Mounts - ADA-R1 RequiredThe Seaview Top Plates are made from a pre-drilled plate that has been incased in a UV resistant ABS plastic. Drill templates come with all Seaview Top Plates...

Direct Mount Adapter Plate for Simrad HALO™ Open Array RadarSeaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting...

3" Low Profile Satdome Mount f/KVH M1/M1DX/TV1, Intellian i1 & i2, Raymarine 33STVSeaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run...

Seaview Stainless Steel Guard for 12-20" Radar DomesProtect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra...

PM5-FMD-8 Camera Mount for FLIR MD Series and Raymarine T200Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras...

8' Pole KitSeaview offers a 8' tall Pole Kit for just about any application. This Seaview Pole Kit is equipped with a adjustable base that has a small 5-1/4" x 3" footprint and a water tight Cable Seal, which can be easily disassembled for pole removal...

SM-18-ASeaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned with fore and aft adjustable rails so that...

PM5-FMT-8Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little...

PM-W6-7This 6° wedge goes between your Seaview mount and mounting surface. The base of the wedge is 7"x7" and is made from machined King Starboard . Utilize wedges to compensate for deck angle or planning attitude of the boat.FeaturesPre-drilled...

Floodlight Kit for 1-1/4" Lightbars - Includes LED Light and HardwareFits all Seaview Modular Light Bars 1-1/4" in diameter.Includes1-1/4" stainless steel clampMounting hardwareHella 0670 Sea Hawk LED Floodlight Specifications:Type: Light/GPS...

Universal Box Top for All-Around, Masthead and Stern LightsThis Light Bar Top is a universal box top for all-round, masthead & stern lights. Please note that lights are not included. Specifications:Type: Light/GPS BracketsBox Dimensions: 5"H x...

LTB Top Universal for Mounting Your Light/GPSThe LTB-U1A is a Universal Light Bar Top for mounting your own light and or GPS. Specifications:Type: Light/GPS BracketsBox Dimensions: 5"H x 8"W x 8"L WT: 1 lbsUPC: 839662009539Quick Guide...

LTB Top Standard 1"-14 Thread for GPS or Wind TransducerAdapter to mount a GPS unit or wind transducer. Uses standard 1"-14 threads. Specifications:Type: Light/GPS BracketsBox Dimensions: 5"H x 5"W x 5"L WT: 0.3 lbsUPC: 839662009522Quick...