Accessories

Signaling Kit - Flag, Mirror, Dye Marker & WhistleSelection of visual and audible signals that can be seen or heard by sea or air rescues.  Pack in a polybag.  Includes:1 USCG Approved Distress FlagApproved for daytime use only3' x 3' with...

Top-Mounted Flag Pole Socket - CP/Brass - 1-1/4" IDFeatures:CP/Brass Top Mounted Flag Pole SocketTube I.D. - 1-1/4"Base - 2-3/4"Height - 2-1/8"Fastener - #6(3) Specifications:Type: Flags & Flag Poles

Top-Mounted Flag Pole Socket Polished Brass - 3/4" IDFeatures:Polished Brass Top Mounted Flag Pole SocketTube I.D. - 3/4"Base - 2"Height - 1-3/4"Fastener - #6(3) Specifications:Type: Flags & Flag PolesBox Dimensions: 2"H x 4"W x 6"L WT: 0...

Threaded Upper Antenna Support AssemblyIncludes forged aluminum "yoke' with 7/8-14 thread (09-1260-23),  2-piece Antenna collar (09-1258-2PC) for 1.5" OD ANTENNAS and black anodized Jam nut (03-1103-23). Select antenna collar option in drop-down...

Gasket & Seal Set for Helm Pumps MT30-MT140Full service kit for VETUS Helm Pumps MT40 to MT140 (including the more recent MTP42, MTP53)Consists of shaft seal (HS801 25 x 42 x 7mm) and back plate gasket (HS804).

Strainer for Type FTR140This strainer is for the FTR140 waterstrainers.

Replacement O-Rings Set - 5-PackSet of 5 O replacement Ring seals for Vetus FTR330 Series Raw Water Strainers.

Set O-Ring & Cover for Waterfilter 330Features:Vetus part #FTR3301 is replacement strainer cover and o-ring for all Vetus FTR330 series raw water strainersSpecifications:Strainer size: 13 (33/64") to 38 mm (1-1/2")Note: Do not overtighten

O-Ring Set for Waterfilter 1320 - 5-PackThis set contains the O-ring (5x) for the FTR1320 Waterfilter

O-Ring & Cover for Waterfilter 1320Replacement lid (Cover) and O Ring kit for the VETUS FTR1320 series raw water strainer units.Fits all sizes from 38 to 51mm.

Adapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas the old style panels measured 98mm x 98mm. Quick Guide...

Universal Leaning Post BackrestTaco Marine's Universal Leaning Post Backrest is designed to fit the Neptune Premium, Neptune II and most standard leaning posts available in the market. Arms fold for easy and convenient storage.Features:Universal design...

Neptune II Leaning Post w/Tackle Storage BagAnodized Aluminum Taco Marine's Neptune II Leaning Post is designed for smaller center console boats, backed by a 3-year warranty. The Neptune II Leaning Post is constructed of Anodized Aluminum, engineered...

Set of Shear Pins for Bow Thruster 45 & 50kgf - 5-PackSet of brass inboard shear pins (3 x 23.3mm) parallel, for the Vetus 45 and 50Kgf Bow Thrusters.

Stainless Steel Baby Snap 3/4" - 2-PackFeatures:Expertly crafted, stainless steelDesigned to match rigorous quality standards2 per pack, 3/4"

Replacement Portlight Lens Only - 5" x 12" - SmokeReplacement lens only for Beckson Opening PortsFeatures:5" x 12"Smoke

Propane /Butane Canister Storage Locker/Tote Bag - Pacific BlueSafe, convenient and essential for boats without approved propane or butane gas storage lockers.  Features:Stows 3 disposable butane or propane canisters safely out-over-the-waterHas...

ROKK SC-USB-02 Charge+  Waterproof USB Socket - Dual PortThe ultimate rapid charge waterproof USB charger with dual socket connectivity that can charge devices up to 3x faster than standard USB sockets.  Featuring an ultra low profile,...

1-1/4" Flush Mount Flag Pole SocketMade from beautiful long lasting T316 polished stainless steelInsets nearly flush to the deck60° angle Specifications:Type: Flags & Flag PolesBox Dimensions: 3"H x 4"W x 6"L WT: 0.6 lbsUPC:...

1-1/4" SS Top Mount Flag Pole SocketMade from beautiful long lasting T316 polished stainless steel. Specifications:Type: Flags & Flag PolesBox Dimensions: 3"H x 4"W x 6"L WT: 0.6 lbsUPC: 040011285461